Special 24" Diameter 3 Jaw, Wedge Type, Ultra-High Speed Wheel Chuck with 5/8" jaw movement (1 1/4" on diameter) provides accurate repetitive chucking on 17,19,22, and 24" diameter wheels. The unique counter balanced system's consistent gripping force thoughout the speed range (up to 1,800 rpm) assures the production of distortion-free wheels.

Unique Double Collet Chuck

Double Collet 12" Diameter Chuck was custom designed and built to grip the flanged ends of 1/2" through 2" investment cast value bodies is easily adapted to lathes requiring a single draw bar or draw tube operation. Work parts having the same or different locating diameters were held several inches apart...draw-back feature provided positive end location.

Special 6 Jaw Power Chuck

Special 15" Diameter 6 Jaw Power Chuck with 4.81" diameter through-hole was specially designed for gripping thin wall tubing. Chuck was configured with American Standard Acme Serrated Master Jaws, 3/8" jaw movement (3/4" on diameter) and 8" type "A" Mount withmaximum recommended speed of 1,500 rpm.

Special 3 Jaw Work Positioner

Special 21" Diameter 3 Jaw Work Positioner with 1.00" jaw movement (2.00" on diameter) was specially designed to grip and locate jet engine compression housings for a CNC de-burring operation. Two sets of top jaws provided a grip diameter range of 6" to 36".

Special 4 Position (90 degrees) Self-Centering Automatic Index Chuck

Special 28" Diameter (90 degrees) Self-Centering Automatic Index Chuck with 1.00" jaw movement (2.00" on diameter) Type "A" Mount was specially designed to grip and locate high alloy valve body forgings for off-shore oil wells.

Special 3 Jaw Drawdown Wedge Type Power Chuck

Special 9 7/8" Diameter 3 Jaw Drawdown Wedge Type Power Chuck was specially designed to grip the ID of automotive brake rotors for use on single or multi-spindle lathes. This power chuck was designed to provide tool clearance to permit machining of both pad surfaces simultaneously. Unique drawdown feature assured positive end location.